MIL-DTL-14522 Components, Prefabricated Strong Room, Portable: For Small Arms And EquipmentThis document covers portable, prefabricated strong room components, for small arms and equipment. It includes all structural components, clamps, and fasteners necessary to assemble strong rooms of various sizes as illustrated in figure 1.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

MIL‐DTL‐14522E

FEDERAL STANDARDS

FED-STD-595/27038 - Miscellaneous, Semigloss

COMMERCIAL ITEM DESCRIPTIONS

A-A-1923

- Shield Expansion (Lag, Machine and Externally Threaded Wedge

Bolt Anchors)

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-T-704

- Treatment and Painting of Materiel

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the

Standardization Document Order Desk, 700 Robbins, Avenue, Building 4D, Philadelphia, PA 19111-

5094.)

2.2.2 Other Government documents, drawings, and publications. The following other Government

documents, drawings, and publications form a part of this document to the extent specified herein.

Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

U.S. ARNY NATICK RESEARCH, DEVELOPMENT, AND ENGINEERING CENTER

NATICK Drawing 13218E8075 - Strong Room, Prefabricated Portable

(Copies of drawings are available from U.S. Army Natick Research, Development, and Engineering

Center, ATTN: SATNC-WEE, Natick, MA 01760-5018.)

2.3 Non-Government publications. The following documents form a part of this document to the

extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

ASME International

ASME B18.2.1

- Square and Hex Bolts and Screw (Inch Series)

ASME SECTION IX

- Qualification Standard for Welding and Brazing Procedures, Welders,

Brazers, and Welding and Brazing Operators

(Copies of these documents are available from www.asme.org or ASME International, Three Park

Avenue, M/S 10E, New York, NY 10016-5990.)

AMERICAN SOCIETY FOR QUALITY (ASQ)

ASQ Z1.4

- Sampling Procedures and Tables for Inspection by Attributes

(Copies of this document are available from www.asq.org or the American Society for Quality, 611

East Wisconsin Avenue, Milwaukee, WI 53202.)

AMERICAN WELDING SOCIETY (AWS)

AWS A5.1/A5.1M

- Specification for Carbon Steel Electrodes for Shielded Metal Arc-

Welding

AWS A5.18/A5.18M - Specification for Carbon Steel Electrodes and Rods for Gas Shielded

Arc Welding

AWS D1.1/D1.1M - Structural Welding Code-Steel