INCH-POUND
MIL-DTL-14522E
17 MAY 2010
SUPERSEDING
MIL-C-14522D
20 MARCH 1987
DETAIL SPECIFICATION
COMPONENTS, PREFABRICATED STRONG ROOM,
PORTABLE: FOR SMALL ARMS AND EQUIPMENT
Inactive for new design after 5 November 2009
This specification is approved for use by all Departments and Agencies of the Department of Defense.
.
1. SCOPE
1.1 Scope. This document covers portable, prefabricated strong room components, for small arms
and equipment. It includes all structural components, clamps, and fasteners necessary to assemble
strong rooms of various sizes as illustrated in figure 1.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this standard or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in section 3 and section 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Philadelphia, ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or email to
dscpg&ispecomments@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5450
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business